- Built-in battery and strong magnetic base; Easy installation.
- Waterproof: IP69K; Anti-vibration: 5.9g.
- TI charging and discharging; short circuit protection; current protection; temperature protection; and power detection; high reliability.
- Lithium battery protection function; overcharge protection during charging; limiting the lithium battery voltage to exceed 4.2V; over discharge protection when discharging; when the lithium battery voltage is lower than 2.9V, the lithium battery output current is only 4.5uA.
- Support DC 5V/12V charging; 12V charging is fast charging; USB charging cable is available.
- Can be charged while discharging.
- LED power indicator.
- Long press the switch to enter the deep standby mode. The battery output current is <0.5mA during deep standby, which is power saving.
- After turning off the connected monitor for 30s, the camera can enter the low power mode by itself. And the battery output current is <30mA, avoiding the loss of power when the device is not used.
- The Panasonic lithium-ion battery is used, which has the advantages of high output power, long cycle life and low environmental pollution.
- Use Pixelplus Sensor with IR function, which can be clearly seen at night.
- Lens angle: 120°.
- IR-CUT is available; the problem of color deviation such as green plants are deviated under sun can be completely solved.
- It also works normally under harsh environment. The charging working temperature is -10°~45°, and the discharging working temperature is -20°~60°.
More information：http://www.stonkam.com/products/Digital-Wireless-Camera-DW697.html
A video of 2.4GHz Digital Wireless Camera with Built-in Battery and Magnet:
没有评论:
发表评论